Dredging



Designation
BIOFLUID LS
Prod. no.
26825
Visc.
68
Properties/applications
Fully synthetic, high-performance EAL for axles in agricultural, forestry, earth-moving and other machinery.
biodegradability: OECD 301 B; > 60%.
Performance grade


Approvals: ZF TE-ML 05H.
more information ›
Designation
BIOFLUID SBH
Prod. no.
26811
26813
Visc.
10W-30
ISO 46
Properties/applications
Fully syntethetic, high performance EAL-UTTO for combined use in powershift gearboxes, hydraulic systems, differentials, axles with hydrodynamic brakes, hydraulic winches and central oil supply for gearboxes, axle drives and hydraulic systems.
Biodegradability: OECD 301 B; > 60%.
Performance grade


Approvals: Sennebogen 012016 (26811).
more information ›
Designation
BIOFLUID ZFH
Prod. no.
26820
Visc.
68
Properties/applications
Fully synthetic, high-performance EAL-UTTO for combined use in gearboxes, axles, hydraulic systems and retarders in railroad construction, agricultural, earth-moving and other machinery.
Biodegradability: OECD 301 B; > 60%.
Performance grade


Approvals: Gürdesan.
Stiebel Getriebe.
ZF TE-ML 03H, 06G, 07E.
more information ›
Designation
BIOGEAR RS
Prod. no.
25325
Visc.
80W-90
Properties/applications
Fully synthetic, high-pressure and high-performance EAL for gearboxes, differentials and final drives.
biodegradability: OECD 301 B; > 60%.
Performance grade
API GL-4/5.

Approvals: Airo by TIGIEFFE s.r.l.
Sequani Meccanica/CTE.
more information ›
Designation
BIOGREASE EP 2
Prod. no.
72868
Visc.
Properties/applications
Fully synthetic, beige colored, environment-acceptable multipurpose grease with EP additives ensuring excellent load-bearing properties. Good water resistance.
Applications: for greasing points on vehicles and earth-moving machinery, water turbine guidevane bearings and screw pumps in sewage treatment plants, and much more.
Biodegradability: OECD 301 B; > 60%. EPA Vessel General Permit 2013.
Performance grade
–35 °C bis/to/à 120 °C

Approvals: Airo by TIGIEFFE s.r.l.
Gürdesan.
Macor Marine.
MMG Mecklenburger Metallguss GmbH.
Rolls-Royce Marine AS - Brattvaag Deck Machinery.
more information ›
Designation
BIOMOT LD
Prod. no.
07405
Visc.
10W-40
Properties/applications
Fully synthetic environment-considerate multigrade oil for extremely heavy-duty diesel engines with long oil change intervals.
Biodegradability: OECD 301 B; > 60%.
Performance grade
*ACEA B3, B4, E4, E7.
*API CI-4.

Approvals: Terex Demag.
more information ›
Designation
BIOMOT LE-X
Prod. no.
07410
Visc.
5W-30
Properties/applications
Fully synthetic environment-considerate multigrade oil for extremely heavy-duty diesel engines with long oil change intervals.
Biodegradability: OECD 301 B; > 60%.
Performance grade
*ACEA E6, E7, E9.
*API CI-4.
more information ›
Designation
BIOMOT LX
Prod. no.
07350
Visc.
10W/40
Properties/applications
Fully synthetic environment-considerate lowSAPS oil for modern diesel aggregates. Particularly suitable for diesel engines with exhaust treatment systems.
Biodegradability: OECD 301 B; > 60%.
Performance grade

more information ›
Designation
BIOTRACK E
Prod. no.
54918
54926
54930
Visc.
68
320
700
Properties/applications
Environment-considerate oil for lost-oil lubrication systems, based on renewable ester. Good emergency running properties even under thin-film conditions.
Applications: flanged wheels, track switches and gear drive chains, hydraulic demolition hammer picks and chisels, wire ropes and cables.
Biodegradability: OECD 301 B; > 60%. EPA Vessel General Permit 2013.
Performance grade


Approvals: Gürdesan.
Macor Marine (54930).
more information ›
Designation
ECOMOT 5W-30
Prod. no.
07310
Visc.
5W-30
Properties/applications
Synthetic lowSAPS diesel engine oil with excellent smooth-running properties (FE – Fuel Economy) for modern environment considerate diesel engines up to EURO 6 classification.
Biodegradability: OECD 302 C; > 40%.
Performance grade
ACEA E6, E7, E9.
API CJ-4/SN.
CAT ECF-3, ECF-2, ECF-1-a.
JASO DH-2.

Approvals: Deutz DQC IV-10 LA
Mack EO-O Premium Plus
MAN M 3477, M 3677
MB-Approval 228.51
MTU Ölkategorie/oil category/catégorie d'huile 3.1
Renault VI RLD-3
Scania LDF-4
Voith Retarder Class B
Volvo VDS-4

more information ›

The Merits of Using Bio Oils over the Mineral-Based Oils

PANOLIN is a frontrunner as a producer of bio oil-products. They are fully synthetic, meeting highest requirements. Some bio oils are made from renewable resources and are biodegradable. These bio oils are useful in their natural form, but adding appropriate additives enhances the performance in different settings. PANOLIN lubricants stand out with a full range of bio oils to versatile applications and cost advantages through longevity.

Superior Lubricity of Bio Lubricants

The bio-based oil has higher lubricity than that of the mineral-based lubricant. For instance, the viscosity index of the bio oil can be as high as 223, while that of most mineral based lubricants ranges between 90 and 100. The oil that has high viscosity is more stable in fluctuating temperature conditions than the oil with a low viscosity index. The viscosity factor explains why bio oils perform better under pressure and temperature.

ISO 15380

We refer to hydraulic fluid as the "lifeblood" of hydraulic systems because it not only transmits power, but also transmits heat to cool components, maintains pH, as well as removes water, oxygen and other contaminants. It means, choosing a high-quality hydraulic fluid is an important decision, and one that should not be rushed. In the past, manufacturers have relied on international standards such as ISO6743-4, ISO 15380, ISO12922 and DIN 51524.

ISO 15380:2016 specifies the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems, particularly hydraulic fluid power systems. The purpose of this International Standard is to provide guidance for suppliers and users of environmentally acceptable hydraulic fluids and for the direction of original equipment manufacturers of hydraulic systems. Concerning the groups contained in ISO 6743-4, only four types of environmentally compatible hydraulic fluid are covered by this International Standard. These are the HETG, HEPG, HEES, and HEPR categories.

As a test method for the biological degradability, the test methods have proven themselves according to OECD 301x internationally established. These test procedures are also accompanied in the current standard ISO 15380 and are also available for the common eco-labels such as EuroMargerite or Blue Angel are the main award criteria.

Bio Oils are More Environmentally-Friendly

The bio oil lubricant is biodegradable, meaning that it has a less negative impact on the environment. In case of oil leakages and spillage, the bio-based fluids are readily biodegraded, unlike the mineral-based that persist in the environment and potentially harm the plants and animals in the affected areas. On the same note, the biodegradable oils are renewable, meaning that they are more environmentally responsible than the mineral oils which are made from non-renewable resources. The bio-based oil lubricant is more sustainable than the mineral oils in the long term.

PANOLIN focuses on sustainability and eco friendliness. All EALs are tested on their impact on the environment. The lubricants from PANOLIN are all awarded labels for eco friendliness that officially prove the fulfilment of highest environmental standards. On top of that, PANOLIN oils stand out with longevity, cost savings and are improving the operation of the machinery.